A rebuilt car is worth what the same year, model, trim and miles sells for on a clean title, minus the rebuilt gap buyers in your market actually pay. That is the whole rebuilt title value calculator, and every number in it should come from comps you can point to. Get it wrong and your max bid at the auto auction is wrong before the lot even opens.
The free AutoFlip salvage value calculator starts a rebuilt title at 82% of clean market value, then moves it by damage type. Treat that as a starting point, not the answer. The steps below show how to check it against your own market and turn it into a bid.
What Goes Into a Rebuilt Title Value Calculator?
Four inputs: clean title comps, rebuilt title comps, the gap between them, and an adjustment for the car in front of you.
| Input | Where it comes from | What to watch |
|---|---|---|
| Clean title value | Retail listings and sold cars for the same year, model, trim and similar miles | Match trim and drivetrain before miles |
| Rebuilt title comps | Listings that state a rebuilt or reconstructed title in your selling area | Few comps means a wide range, so plan from the low end |
| Rebuilt gap | Clean value minus rebuilt comps, in dollars and as a share | Measure it per model, not once for every car |
| Car adjustment | Damage type, repair quality, paperwork and photos | Structural, flood and airbag history push value down |
The Copart lot details page shows Estimated Retail Value next to the title, but that is not one of these inputs. The Copart Glossary says ERV is submitted by the seller, is "the value prior to the occurrence of the damage," and comes with "no representations as to the validity or accuracy." Use your own comps instead.
How Do You Find the Clean Title Value First?
Start from what the repaired car would sell for with a clean title, because every rebuilt number is measured off that line.
Search the exact year, make, model and trim. A base trim and a top trim can sit far apart, and that gap is bigger than most title discounts.
Keep miles within a reasonable band of the auction car and note drivetrain, engine and color.
Use asking prices only as a ceiling. Cars you saw actually sell, or that sat for weeks, tell you more.
Write down five or more comps with the date you checked. Take the middle of the range, not the best one.
Our guide to salvage ARV comps covers how to filter comps for auction cars in more detail. Rule: if you cannot find three clean comps, you do not have a clean value yet.
How Do You Measure the Rebuilt Gap in Your Market?
Subtract the typical rebuilt comp from the clean comp for the same car, and that difference is your rebuilt gap.
Rebuilt comps are thinner than clean ones, so widen the search area and the model years by one if you have to. Look for listings that say rebuilt, reconstructed or prior salvage in the title section, not just in the description. Note how long each one has been listed, because a rebuilt car that sits is telling you the gap is bigger than its sticker suggests.
Do not borrow one national percentage for every car. Our post on rebuilt vs salvage title resale covers why the brand costs money at all; your job here is to measure how much it costs for this model in your area. Rule: when your measured gap and the calculator's baseline disagree, plan from whichever leaves the lower resale.
Why Does the Brand Follow the Car to Every Buyer?
Because state law puts the rebuilt brand on the title and national title records carry it, every future buyer can see it.
In Florida, for example, Fla. Stat. 319.14 says a person may not knowingly sell a rebuilt vehicle until the state has stamped words on the title stating it was rebuilt, and the state then affixes a decal to the vehicle showing it to be rebuilt. Other states use their own wording, so check your state's DMV before you price the car.
The federal NMVTIS consumer page says the system lets buyers check a vehicle's title, latest odometer reading and brand history before they buy, and defines a brand as a label a state assigns to show a vehicle's current or prior condition, such as "junk," "salvage" or "flood." Price the car as if every shopper will pull that report, because the careful ones will.
How Do You Adjust the Number for the Car You Are Bidding On?
Move the rebuilt value down for damage that scares retail buyers, and only up when you can prove the repair.
The salvage value calculator page lists its own damage adjustments: cosmetic damage adds 10 points to the title share, while front end takes off 7, airbags 9 and flood 10. Its worked example puts a $15,000 clean car with a rebuilt title and front end damage at 75%, or $11,250.
Damage type. Light cosmetic hits sell closer to the rebuilt baseline. Flood, airbag and structural history sell lower and slower.
Repair quality. OEM parts, a clean panel fit and no warning lights keep you near the top of your range.
Paperwork. Inspection papers, parts receipts and before photos make the price easier to defend.
Repair cost. Run the damage through the free salvage repair estimator for a planning range, then budget toward the high end when photos are thin.
Rule: if you cannot name a reason the car beats the typical rebuilt comp, price it at the typical rebuilt comp.
How Do You Turn Rebuilt Value Into a Max Bid?
Start from the adjusted rebuilt resale, subtract every cost and your profit, and what is left is the most you can spend on the bid plus buyer fees.
Here is a hypothetical with round numbers, not a real lot. Clean comps for the car land around $14,000, and rebuilt comps in your area sit near $11,000, so you plan a resale of $11,000.
| Line | Hypothetical amount |
|---|---|
| Planned rebuilt resale | $11,000 |
| Repairs (high end of your range) | minus $3,000 |
| Transport | minus $500 |
| Rebuilt inspection and title paperwork | minus $500 |
| Target profit | minus $2,000 |
| Left for the bid plus buyer fees | $5,000 |
Buyer fees come out of that $5,000, so read the Copart member fees or IAA buyer fees chart for your account type and back the fee out before you set the bid. The free max bid calculator does that subtraction for you once you enter the title type, repairs and profit. For the inspection line, our rebuilt title inspection cost guide breaks down what to budget.
If the bid that comes out is below where these cars usually stop, pass. For the bidding side of the plan, see the pillar guide on setting your Copart max bid and our post on the title discount in max bid math.
How Do You Get Buyers to Pay the Top of Your Rebuilt Range?
Show the brand and the repair up front, because a rebuilt buyer pays more when nothing is left to discover.
Photograph the car the day it lands, before any work, from the same angles you will use for the listing.
Keep every parts receipt and shop invoice in one folder from day one, with the VIN on each.
Keep a copy of the state inspection paperwork and the new title showing the brand.
Pull the vehicle history report yourself and hand it over before the buyer asks.
Offer a pre-purchase inspection at a shop of the buyer's choice. A buyer who sees you invite it relaxes.
Put "rebuilt title" in the first line of the listing. It filters out shoppers who were never going to buy and saves you test drives.
Rule: if you cannot show the before photos and receipts, plan your resale from the bottom of your rebuilt comps. Our rebuilt title risk checklist is the list your buyer is likely working from.
Where Does AutoFlip Pro Fit?
When you want the comps, lot details and max bid in one place, run a free Copart lot analysis with AutoFlip Pro. Paste a Copart or IAAI lot and the free scan returns lot details, photos, VIN decode and a max bid, so you can check it against your own rebuilt resale number.
Before You Bid on a Rebuilt Candidate, Check This:
Three or more clean title comps for the same trim and similar miles
Rebuilt comps from your own selling area, with how long they sat
Your measured rebuilt gap next to the calculator baseline
Damage type, and whether it is structural, flood or airbag related
Your state's rebuilt inspection steps and cost
Repair range from the high end, not the middle
Buyer fees for your account type, backed out of the bid
Key takeaways
Start from clean title comps for the same trim and miles.
Measure the rebuilt gap from local rebuilt comps, model by model.
Ignore ERV as a resale number; the seller submits it and Copart does not vouch for it.
Plan from the lower of your measured value and the calculator baseline.
Turn the rebuilt resale into a max bid only after repairs, inspection, transport, profit and fees.
FAQ
How do you calculate rebuilt title value?
Find the clean title value for the same year, model, trim and miles, subtract the rebuilt gap you measure from local rebuilt comps, then adjust for damage type and repair proof.
Is there a free rebuilt title value calculator?
Yes. The free AutoFlip salvage value calculator has a rebuilt title option that starts at 82% of clean market value and adjusts by damage type.
Is Copart Estimated Retail Value what a rebuilt car will sell for?
No. The Copart Glossary says ERV is submitted by the seller and is the value before the damage happened, with no claim that it is accurate.
Does a rebuilt title ever go away?
Plan as if it never does. States such as Florida stamp the brand on the title, and NMVTIS lets any buyer check a vehicle's brand history.